Acronis True Image 2015 - User Guide User Manual download pdf (Page 108)

 pci=nobios

Disallows use of PCI BIOS; only direct hardware access methods are allowed. For instance, this

parameter may be used if you experience crashes upon boot-up, probably caused by the BIOS.

 pci=biosirq

Uses PCI BIOS calls to get the interrupt routing table. These calls are known to be buggy on several

machines and they hang the machine when used, but on other computers it is the only way to get

the interrupt routing table. Try this option, if the kernel is unable to allocate IRQs or discover

secondary PCI buses on your motherboard.

 vga=ask

Gets the list of the video modes available for your video card and allows selecting a video mode most

suitable for the video card and monitor. Try this option, if the automatically selected video mode is

unsuitable for your hardware.

8.1.1.3 Creating a custom WinPE 3.0 ISO with your drivers

Sometimes a basic WinPE disk with Acronis Plug-in does not have drivers for your specific hardware,

for example, for storage device controllers. Users of Windows 7 can add such drivers to the basic

WinPE 3.0 image (WIM) before creating an ISO file with Acronis Plug-in.

Attention! You can only add drivers which have the .inf filename extension.

The following procedure is based on an MSDN article that can be found at

http://technet.microsoft.com/en-us/library/dd799244(WS.10).aspx

To create a custom Windows PE image, proceed as follows:

1. In the Start menu, click Microsoft Windows AIK, then right-click Deployment Tools Command

Prompt and select Run as administrator.

2. Run the copype.cmd script to create a folder with Windows PE files. For example, from a

command prompt, type:

copype x86 C:\winpe_x86

3. Mount the base image by using the DISM tool to a local directory. For example,

Dism /Mount-Wim /WimFile:C:\winpe_x86\winpe.wim /index:1

/MountDir:C:\winpe_x86\mount

4. Add your hardware driver by using the Dism command with the /Add-Driver option. For example:

Dism /image:C:\winpe_x86\mount /Add-Driver /driver:C:\drivers\mydriver.inf

5. Repeat Step 4 for all other drivers you need to add.

6. Commit the changes using the Dism command with the /Unmount-Wim /Commit option.

Dism /Unmount-Wim /MountDir:C:\winpe_x86\mount /Commit

Do not exit the command prompt.

7. Start Acronis Media Builder and add Acronis plug-in to the custom .wim file. Refer to Creating

bootable media (p. 106) for details.

8. Create a PE image (.iso file) from the resulting .wim file. Refer to Creating an .iso file from a .wim

file for details.

8.1.1.4 Creating an .iso file from a .wim file

To create a bootable media by using a .wim file, you need to convert it to an .iso file first.

1 2 ... 103 104 105 106 107 108 109 110 111 112 113 ... 145 146

No comments

Acronis True Image 2015 - User Guide User Manual Page 108